Сэмплирование – использование мелодических фрагментов при создании битов.

Статья о сэмплировании от Limit_Martini

Может кто и читал её уже, но я только сейчас наткнулся на эту статью. Довольно понятно всё описано, есть музыкальные примеры. В общем стоит почитать для ознакомления. 

Читать

В этом видео я показываю, как можно легко узнать ноты инструмента на примере ремикса:
Юшер - Этот Мир Не Вернёт (feat. DaLee) (Remix By BeatCheat)

Смотреть видео

Скачать трек

This is a Build of the Very first synth/keyboard that
Casio made! And Im tellin ya, man!! this thing is built!
ALL WOOD outer skins and frame, inside super heavy steel
chassis, And rear output panel, built with TOP quality
electronics thru out!!

It’s Presets are a wide variety ranging from Flutes, to
Harpsichord, to Organs. Mostly, pretty typlical for any
early keyboard. The keyboard is 49 keyz / 4 octave.

What I found really nice about doing this build, was how
‘Warm’ it sounded while I recorded it …… wOw!!!


I ran it directly into one of my Delta 1010′s at sample
rate of 44 and 24 bit. All in mono, right to the PC.
All edits completed using Sound Forge v8, and the only
plugin used for enhancement was Steinberg’s Magneto.

So many of the Tones/sounds almost the same, in fact,
the bulk of ... Читать дальше »

И снова человек под ником andrews65 представляет вам свой очередной перевод,

на этот раз это "Видеошкола Addictive Drums".

Сделал новое видео о том, как сделать крутой скретч на примере трека

"Самый лучший день" из моего альбома "Моя лирика" 2010.

 

This is only ONE sample sound set …….
Soundz almost exactly like the ‘Rush – Tom Sawyer’ synth!!

These wave files were created by ; ‘melamed’ .
I ve re-edited ALL the wave files to proper use, and created
these kiLLER nki presets for you to use!!

The Scriptz Ive created will give you several different soundz
thru out these presetz!

Included: ( 313 meg / 61 filez / 2 folderz )

- 96×16 bit stereo wave samples.
- For KONTAKT 4
- Absolutely Stunning GUI’z !!
- TONz of Different controls out front!
- #1 Sample-sound-set / 5 nki presetz.

Using carbon Steel ‘ restaurant grade’ cooking wok’s,
I built two : ( 14-inch & 20-inch) hang (Drum) – ’wok’ !!
Ive been working on this idea ever since I built my
‘Hank Tank’, So the tone has come out rather surprising,
sounding like a cross between a ringing hang drum, and a
Steel drum sound!!

I used several different micing technikz to get the different
sounds I needed, and different rooms also. Moving from
my vocal booth to my drum room, and then onto my
Control room also.

Ive built several different approaches to this thing, because
its really become quite overkill with others building the same
thing over and over with this particular instrument.

You’ll find velcoity, multi-layered, keyswithed and Round Robin
thru out all these nki builds... Читать дальше »

This build consist of basically single phrase hitz,
some loops thru out the mapping arrangement.

Several Backward / rev parts – builds also included.

Most of the builds are ROOT C#/dflat and G#/Aflat,
perspectively, (If your counting half stepz anyway!)

Included: ( 371 meg / 189-filez / 2-folderz )

- 44x24bit Stereo Wave files.

- Super kOOL GUI / EFx Galore!!

- Set for kontakt 2 & 4

- Tunings range from C# to G#

- 12 presetz total:( 6-k2 & 6-k4)

This is a simple pack of synths, guitars, drums & Stringz ,
All designed for your demo & finished composition werkz!!

This first volume of ‘utilitiez’ is comprised of Single
shot, Phrase’z & some Loops.

All builds are laid out for fast, simple & easy to werk
with nki filez. Allowing you to use keyswitching thru
out every build and be able to just get to werk while
the inspiration hitz U’z !!


I will be creating several of these ‘Utilitiez Packs’
as time goes by. Due in part to the abundance of my
large library of wave filez on hand.

Many come from different source’s such as session I have
recorded thru out the years in my studio, to free sounds
I had gotten online from many different producers whom
offer them up for free.

So look forward to more volumes in the future, because... Читать дальше »

Новый инструмент от Ø/on3 AnaloG.


A friend has started a projekt, building a very OLD
analog IC boards with a TUBE (yes I said TUBE!);
Rectifier OUTPUT!!!

He has brought it to my attention to help him design
the midi circuitry it will need; to adapt it to a PC
in order to make its functions werk properly.

So now it will be my task, to go thru all the knobs
and circuits, and label them accordingly ; as to what
they are and do .

This has taken some time ‘for sure’!!

So slowly and surely with ‘pain staking’ care,
I created several very kOOL ‘tweak at the moment
presets’. As there was no way to save presets,
"except to write down where all the knob and fader
settings were!!”


Its tones and output are a dream come true to me!
The synth has a TOTAL analog gritty tone to it,
and ... Читать дальше »